Gnome Miniature Engineering model railway bridges: G scale and Gauge 1 truss bridges

Custom and standard bridges for G scale, O scale, and garden railways

_________________________________________________________________________________
Gnome Miniature Engineering is located beside the Grand River in Ontario, Canada, an area we acknowledge to be the traditional lands of the Six Nations of the Grand River.

GME MODEL RAILWAY BRIDGES: Our structures are multi-scale working structures for small railways rather than scale models. They are hand built from laser cut, brake formed parts, and assembled by traditional solid riveting. Structures designed to your own requirements can be built at a reasonable cost when standard parts are used.

Standard bridges are built from corrosion resistant materials for year round operation on garden railways. They are ready to use, painted or unpainted, except for the installation of the track. They have been used with track from 16.5mm gauge for 0n30 to 63.5mm for Gauge 3.

GARDEN RAILWAY BRIDGES: plate girder bridges and underslung trusses for G and larger scales.

O and S SCALE BRIDGES: plate girders, through and underslung trusses, working bascule bridges.

EDUCATIONAL MODEL TRUSSES: The truss bridges are available as educational models to demonstrate the principles and properties of trusses. These will normally be supplied without paint finish or decks. Material and section data are available.

The model number (TR32 etc) indicates the type and length of the bridge deck in inches. For prices, availability, installation drawings and enquiries about custom designs, please contact us at gme@gnomengineers.com

Updated on 9th March 2018 - posts updated
________________________________________________________________________________

21 May 2015

G scale and Gauge 1 truss bridges

These are available in three widths as deck trusses for the larger scales, with the timber deck included. The standard lengths are shown above, and others are available to special order. An example of the narrowest version of the TR42 built for NGT Models, with two PL36 plate girders, is shown below. This is 114 inches (2.9m) overall, and assembled with 1,274 solid rivets. Watch an animation of the bridge installation.